Article Trunk



We made SP3 to be the deepest penetrating oil ever.

04.08.2009 · Posted in Home and Garden Articles

SP3 is the deepest penetrating oil you can buy. It was created after we decided that other products weren’t working well enough for us.nnRust is no match for SP3. Just soak the corroded item or area with SP3 and give it some time to work. It won’t take too long for our deep penetrating formula to work. Use a brush or scratch pad to remove the rust. Wipe the area, then wipe again with a dry rag. Now that the rust is gone, you can paint right away. You don’t even have to clean SP3 away.nnThere’s nothing really that special about making it easy to take care of rust problems, and that isn’t why we created SP3 to be the best penetrating oil on the market. SP3 has the deepest penetrating properties we could get so that we could get frozen parts back in working order and, especially, to unstick totally stuck engines that got that way after decades of neglect.nnBecause SP3 is the best penetrating oil you will find, all you have to do is spray your frozen parts and relax. Wait a little while as the capillary action of this deep penetrating oil allows it to seep into the spaces in the part and free it up. It only takes a little patience, and a little low-viscosity SP3.nnLow-viscosity makes SP3 the deepest penetrating oil available. And the best use for SP3 is to unstick engines that are really stuck.nnTo free your seized engine, first prepare it by removing all sparkplugs, or injectors if the engine is a diesel, and draining any water still sitting in the cylinder. Use a **** nozzle inserted in the sparkplug hole to do this.nnNext blast the cylinder and the intake manifold with a two or three second spray of SP3. Wait about 24 hours to allow the best penetrating oil to seep deeply into the engine.nnPut the transmission in gear. Rock the car/truck back and forth, OR, put in a fresh hot battery and bump starter several times. If your engine isn’t unstuck, repeat this process with another burst of the deepest penetrating oil, SP3.nnForty-eight hours to unstick an engine that got that way over many years? It is not too much to ask of the deepest penetrating oil available, and SP3 does most of the work for you. If your engine is so stuck that even two treatments of this deepest penetrating oil don’t free it up, call us, and we will help you get that engine free.

Leave a Reply

You must be logged in to post a comment.