Article Trunk



HOW TO USE METRIC THREAD GAUGES AND METRIC THREAD TAP

01.20.2020 · Posted in Business News Article

Metric thread tap is a set of instruments that are used to make your own nuts and bolts. A metric thread tap is used to cut the thread into the hole through which bolts can cross through. It makes a perfect hole on the object through which the bolt can easily pass through and hence, can connect two objects.

When the Metric thread tap converts the hole into a pass-through the channel, it takes the little chips aside, ejecting them, according to your own wish and subsequently, a hole design can be made according to one’s requirements. Tap are divided into three types; Taper tap, Plug tap, and Bottoming tap.

Plug tap is the most common one used for general purposes. It is easy to start and form deeper threads than tapper tap with the help of this metric thread tap.

A taper tap is used when a full end hole is needed. Taper tap start plugging a hole with a narrow width and then subsequently while going in, its width increases, being widest at the upper end. Taper taps are also called starter taps because they start to hole burrow.

Bottoming thread tap is for a full-length thread with the same diameter/width throughout the entire length. This type of metric thread tap has no ground threads. They are not good at starting of burrowing hole.

Other kinds of Metric thread taps include Straight flute taps, Spiral point tap, Spiral flute taps, Fluteless taps, Nut taps, Solid Carbide extension taps or pulley taps, and Oversize taps. Like all the other taps, these taps are classified according to size, the product being used, and the diameter they have.

Metric thread gauges may be explained as the taper-lock thread plug gages which may be good for handling and convenience. These taper lock may be available according to a special need. Such metric thread gauges are also coated or non-coated, accordingly. They can be manufactured in carbide, ceramic, and steel.

Metric thread gauges may also be of reversible style thread plug,  in which one end is being rotated. It is best for high range of varieties being looked for. They are also made according to any special need, manufactured in carbide, ceramic and steel.

Metric set plugs are used to set metric ring gages or metric thread gauges. It has GO and NO GO members. The full form part of it corrects the big diameter whereas the other controls the pitch diameter. The ring passes through the entire plug, and if it doesn’t, then this is an unqualified object. They are classified on the basis of sizes and product that is being used.

Metric Thread Tap is used in the manufacturing of threads or cutting tool while the Metric thread gauges for measuring it. Tap basically form the female object to be mated while die cuts the counterpart i.e the male part or the bolt. More precisely, the internal threading is done by taps and external threads are made by die according to the need. Proper and good handling of the objects with lubricants reduce the friction and is good to go with.

Contact :

Chenchuan Tools Co.,LTD
Chenbei Industry Zone,
Longgang Road,
Huangshi,
Hubei 435202
Tel: 0714-7321211
Fax:0714-7321210

Comments are closed