Is your computer overheating? Learn to prevent it in a few simple steps!

By: Brooke M. Perry

Do you know that some components of your PC may get very hot due to constant usage and it becomes to such an extent that it becomes irritating and start causing inconvenience. As we all are aware of the fact that our CPU and Graphics card may get overheated if they are used constantly. Various computer manufacturers and assemblers incorporate multiple fans in the computerís case to let out this heat and to prevent your machine from getting overheated.

If you are running a system which is generating unbearable heat or temperature, then you might not be aware that youíre keeping it at an irreparable risk. PC management includes installing new updates for software, upgrading your hardware often but keeping your PC cool should be a top priority in this list.

In this article, you will read about the tips that can help you to keep your PC cool:

1. Give it proper space

You should keep your PC in a well-ventilated and airy room to ensure proper air flow. Try to remove all the obstacles in the air flow path, by doing this your PC will not crash or freeze because of getting overheated. Ensure that the back and the sides of the system are not blocked by a wall or a cabinet door. As many of you know that, most of the hot air flows out of the case from the back of the machine, hence, the back should be completely open.

If you cannot place your system in a completely airy room, then try to provide at least 2 to 3 inches open space on either side. In particular, avoid, closing the cabinet door if the machine is hidden inside a desk, as cool air enters the cabinet from the front side only. Closing the door may allow the hot air to recycle inside the desk and getting even hotter when the computer is constantly running.

2. Clean your computer regularly

Cleaning your PC does not mean only cleaning it from outside. Manufacturers have installed various fans inside your device to keep it cool. Have you ever though what makes your PC fans to slow down and then stops them completely? Itís the dust and other small particles that enter into the case, gets stuck there and finally results in stopping the fans.

You need to open the case and then clean the internal fans to cool down your PC. A traditional case contains minimum three fans, one is at the top the CPU, one inside the power supply, and usually one or more on the front/back. Switch off power supply while cleaning your system and use only canned air to remove the dirt from each fan. If you are not comfortable with cleaning it yourself, then call a technician or take your device to a PC repair outlet.

3. Run your PC with its case open- A myth

Many people believe that for keeping your PC cool, you should run it with the case open. Itís quite logical that if the case is open, then more air can flow through power supply and other heat prone areas. But, the user should also think that along with air, a lot of dust particles will also enter the case, therefore, blockage can result in heat removal fans. So, it is advisable to run your machine while keeping its case closed and fans cleaner.

4. Make a move

Immediately shift your computer to a better airy place when you start observing the signs of overheating. Common symptoms of overheating are frequent restarts and sudden shutdown. You can also check the temperature of the machine by observing the case exhaust. If you find that all the above mentioned issues are occurring, then turn off, unplug your computer and move it to a safer and well-ventilated place.

5. Ensure all fans are running properly

If youíre facing frequent computer overheating issues even after cleaning, then open its case and ensure that all the fans connected and are running properly. Itís quite possible that a wire of CPU, graphics card, or case fan is damaged or became unplugged, resulting in reducing the air flow and increasing the temperature. Make a habit of checking all the fans and their attached cables, when you open the computerís case for cleaning or any other purpose.

6. Re-apply thermal paste

It is a bit complex task, so either hire a technician to do it or ask for help from your tech enthusiast friend. Thermal paste is applied to heat sink for its proper seating, however, it loses its properties over the period of time. So, if you are aware of the construction of your PC, then detach all the cables from motherboard and remove the heat sink. Now, re-apply new thermal paste and reseat the heat sink properly to its original position.

Above mentioned are some of the tips that can prevent your PC from getting overheated. Keeping your PC away from direct sunlight and heating systems, putting it closer or under an air-conditioned environment, maintaining adequate ventilation and avoiding blocking air outlets of the computer case are some of the other helpful tips to avoid overheating. Try to service your devices at regular intervals for avoiding blockage and poor functioning of the fans and heat outlets.

Article Directory:

| More

Hi! I am Brook M. Perry, a prolific blog writer and keen author of articles related to computer security and solution for issues related to computers and mobile devices. Being associated with the reputed best pc tuneup service provider Qresolve, I have resolved thousands of tech issues for our customers from worldwide

Please Rate this Article


Not yet Rated

Click the XML Icon Above to Receive Software Articles Articles Via RSS!

Powered by Article Dashboard