Articles in Home | Industry Articles | Manufacturing Articles

  • High Temperature Fans, Blowers, Ventilators  By : Oleg Tchetchel
    There are two major types of Tenderall high temperature fans - axial and centrifugal:

    Axial Blade Fans:

    * The axial blade wheel is usually specified where there is a need for very large volumes of air flows against low static pressure. Axial wheel like the multi-blade forward curve type wheel could cause an axial fan to deliver different air volumes at the same static pressure, if the total pressure requirement of the fan system was underestimated.
  • Low Leakage Blowers, Fans  By : Chicago Blower
    Gas tight fans and blowers could be used in the following industries:

    * Pollution Control
    * Pulp and Paper Industry
    * Printing and Converting
    * Chemical Plants
    * Power Generation
    * Research and Development
    * Petroleum
    * Food Processing
    * Paint and Ink Industries
  • Make-Up Air System - Power Tube Fan  By : Oleg Tchetchel
    Tenderall Fan Co. has developed a PT Power Tube Make-Up Air System - one of the most economical options for larger industrial plants ventilation air make up systems.
  • Positive Pressure Utility Fans  By : Chicago Blower
    Standard features of CBC Positive Pressure Ventilators include: fold down "T" handle; 8" pneumatic tires with full width axle; a "tilt and lock" device that allows the unit to be angled 20 degrees up or down with infinite positions in between; sturdy and light 1 inch wrap around frame. Explosion proof electric motors are available as drivers too.
  • Air Tight Sealed Blowers and Fans  By : Oleg Chetchel
    Special materials and alloys frequently used in gas tight fans, especially for service in hazardous, abrasive, corrosive and high temperature environments, include: Corten, ASTM A36 Carbon Steel, Hastelloy, Inconel, Stainless Steels of different kinds, Titanium, Monel, Aluminum, Teflon, Rubber.
  • Most Preferred Industrial Trolleys - Fold Away Trolley and Aluminium Hand Trolley  By : Rich Mond
    There many types of trolleys available in the market, from which you can choose the ones that best suit your requirement. However, the most popular among the various types are the ‘fold away trolleys’ and ‘aluminium hand trolleys’.
  • The Advantages of Professional wasserstrahlschneidanlage  By : Adrian Rocker
    Wasserstrahlschneidanlage is the most user friendly process of cutting materials nowadays. This is mainly because of the fact that apart from being economical it is the best environment friendly option for cutting various types of materials. The wasserschneiden materials do not contain any rough edges and remain absolutely smooth. The extreme high pressure of the water cuts the materials perfectly without damaging the materials integrity.
  • PT Power Tube Make-Up Air System  By : Chicago Blower
    Air Make-Up fan system is a new ventilation concept. It utilizes some aerodynamic principles for supplying, tempering and distributing make-up air in a building in cold weather. It offers more efficiency, economy and comfort than most conventional make-up air units.
  • High Quality Industrial Wheels Sold Online  By : Noah Snider
    In all the big industries and organizations; movement of products and materials plays a significant role in determining the smooth flow of the process. There are many huge and advanced technologies that are used to manufacture a product from raw material to final goods but the movement inside the big organization takes place on casters and wheels.
  • Applications of Commercial Purging Compounds in Extrusion Processors  By : Johnsteve
    Over the years, purging compounds have come to play a crucial role in thermoplastic processing.
  • Power Tube Fan for Whole Building Ventilation  By : Chicago Blower
    Tube Fan Make-Up Air System solves all of these problems economically, even on the coldest winter day.

    In the winter, conventional make-up air systems have to heat the cold outside air prior to introduction into the building. This is an expensive process in both equipment and continuing energy cost. The Power Tube Fan Make-Up Air System is a simplier system that utilizes wasted building heat and basic aerodynamic principles for supplying, tempering and distributing make-up air. And that makes it less expensive than conventional make-up air systems to purchase, to install and to operate.
  • Flow Coating Machinery For Your Business  By : Noah Snider
    The process done to give the product or the material its final look, to achieve sleekness and efficiency is called Flow Coating; in other words it is the process where the materials are completely dipped with the layers of paints, till the time the desired look or the performance is not obtained.
  • Zero Leakage Ventilators for Sulfur Recovery  By : Oleg Tchetchel
    Sulfur removal process requires a gas-tight, zero leakage, high temperature and high pressure blower for intermittent duty that must handle toxic gases and must be capable of being brought on line immediately upon demand. To do this the following features on the blower must be provided:

    - Double welded casing construction;
    - Steam flows between the housing walls to maintain a constant 285 F gas temperature inside the fan (because below 285 F sulfur will change from a gaseous to solid state.
  • Industrial Blowers by CBC Fan Co.  By : Chicago Blower
    The advatange for series operation is the likehood of initial cost savings - it is often more economical to select two "smaller" blowers with their respectice smaller motors and drives than to select one "larger" blower to do the job.
  • Vaneaxial Fans for Duct Ventilation  By : Chicago Blower
    CBC Fan Co. has devloped a new high pressure small vaneaxial fan that finally resolves the problem of boosting air flow in long ventilation ducts of today's large residential houses.
  • Regenerative Blowers by Canada Blower Company  By : Susan Terlitski
    There are four power-source choices for regenerative blowers: DC power, AC single-phase, AC three-phase, and engine. Features for regenerative blowers include: control panels and pressure or vacuum gauges. Most control panels include adjustment controls instead of a simple, regulator knob. Regenerative blowers can also have a pressure or vacuum gauge or sensor with a dial or digital readout that monitors the pressure or vacuum levels in the system.
  • Fans for Industrial Process Ventilation  By : Oleg Tetchel
    Air conditioning can often become too large of an expense for industrial areas, but the good news is that an industrial fan can bring some much needed relief in this case. Industrial electric fans can be quite helpful for places where heat stratification, dampness, and stagnant air become frequent problems. Also, for high static pressure an industrial fan is what you need. Also known as an industrial electric blower, these units replace air as well by blowing out the old and stagnant air.
  • Conveyor Designs That Change the Way You Do Business  By : Rich Mond
    A conveyor system is equipment that helps in handling mechanical requirements. Most business use conveyor system to transport goods for one place to the other in the warehouse or the factory. A conveyor roller usually consists of shafts, screws, bearings, sprockets, wire mesh, a large chain and belt. The most common belt conveyor is usually made rubber, though there are other cheap materials like plastic available for those who do not wish to spend much on a conveyor.
  • Axial FRP Fans and Ventilators by Canada Blower  By : Susan Terlitski
    Canada Blower fans are the finest quality blowers available for efficient movement of corrosive, humid, or polluted air, gases, and fumes. These fire-retardant and corrosion-resistant plastic fans are specially designed and especially suited for hostile applications where coated metal blowers typically corrode. Canada Blower fans are proven thoughout the world and clearly recognized for superior quality, reliability, and efficiency.
  • Gas Tight Fans, and Blowers  By : Oleg Thcethcel
    Some special materials and alloys frequently used in gas tight fans, especially for service in hazardous, abrasive, corrosive and high temperature environments, include: Corten, ASTM A36 Carbon Steel, Hastelloy, Inconel, Stainless Steels of different kinds, Titanium, Monel, Aluminum, Teflon, Rubber LIning. These materials are typical for industrial applications requiring high strength alloys and super alloys too.
  • Radial Blower Fans  By : Oleg Tetchel
    Radial fan can be applied in so many different ways and usually run by using electricity although a radial fan can also run off a generator. Most households have a radial fan, there is generally some sort of fan found in most houses. A radial fan can be just your normal portable fan or a ceiling fan is normal is most humid areas. When you do have a ceiling fan it's important to note that most of them must be put in by an experienced electrician otherwise you could have some serious problems wit
  • High Pressure Inline Mixed Flow Fans  By : Oleg Thcethcel
    A newly developed high pressure MVA series mixed flow in-line fans finally resolves the problem of pushing air through high resistance and long ventilation ducts.
  • Fans for Pulp and Paper Industry  By : Oleg Thcethcel
    Canada Blower Co. is a major supplier of fans and blowers for Pulp and Paper Industry. The paper manufacturing industry utilizes fans for power boilers, recovery boilers, lime kilns, dissolving tanks, and dryers. These applications, which are integral to the production process, are often very corrosive. Reliability and durability of fans and blowers for such applications are vital for continuous operation. Canada Blower fans for demanding and corrosive applications offer real value.
  • Side Channel Regenerative Blowers  By : Oleg Tetchel
    Side channel blowers are oilless and have no complicated intake/exhaust valving. Most can be mounted in any plane and, with dynamically balanced impellers, generate little vibration. Because they are nonpositive displacement compressor/vacuum pumps, they discharge air that is clean and pulsation free, which are important considerations for today's plant instruments and controls.
  • Manufactured Replacement Parts For Sand Mixers  By : Noah Snider
    Replacement parts for sand mixers are important part of foundry equipments. The mixing machines are exposed to a lot of wear and tear and looking for best maintenance options is quite a practical thing to do.
  • Development of high temperature fans and blowers for operating up to 2,200 F is introduced by Canada Blower.  By : Susan Terlitski
    Canada Blower Co. developed new temperature fans and blowers for industrial applications to 2200 F. This was achived by using extremely high strength stainless steel alloys for the fans impellers, that allow for higher safe speeds at elevated temperatures.
  • Manufacturing The Best Casters For Heavy Equipment  By : Noah Snider
    The work in industries requires strength and power. There are many heavy equipments which needs to be lifted on daily basis in industries without which the work cannot progress at the required pace, but the answers to all these problems is satisfactorily answered by Caster solutions.
  • Valves Used In Engines  By : Paul K James
    Stock valve materials have been upgraded to a long lasting alloy of aluminum and steel. An engine constructer must be able to choose wisely on which valves for maximum performance on their engines.
  • The best types of Pistons and Valves  By : Paul K James
    High performance valves are made from the finest Swedish steel in a special composition alloy which is designed for transfer of high amount of heat. These Swedish steel are made in advanced metallurgy by experienced masters.
  • Pistons as the main component of the engine  By : Paul K James
    A piston is a mobile component contained by a cylinder and is made gas tight. The racing piston moves up and down in a linear motion. Its primary purpose in an engine is to transfer force from expanding gas in the cylinder to the top of the crank through a connecting rod.

«[7] [8] [9] [10] [11[12] [13] [14] [15] [16] [17

Powered by Article Dashboard