Articles in Home | Industry Articles | Information Articles

  • Industrial Centrifugal Blower and Fan  By : Oleg Chetchel
    Backward Inclined Fans – Simple flat blades, but backwardly inclined to match the velocity pattern of the air passing through the fan wheel, which results in high-efficiency operation. These fans are typically used in high-volume, relatively low-pressure, clean air applications.
  • Blowers and Fans for Industrial Use  By : Oleg Chetchel
    Fans and ventilators utilize power from a motor to generate a volumetric flow of air at a given pressure, and are considered low-pressure air pumps. A propeller converts torque (turning force) from the motor (typically permanent split capacitor AC induction motors or brushless DC) to increase static pressure across the fan rotor and to increase the kinetic energy of the air particles.
  • Industrial Blowers and Fans by Canada Blower  By : Oleg Thcethcel
    Fans are classified into propeller, tube axial and vane axial styles, and each type has different characteristics. Propeller fans consist of only a motor and propeller and therefore are the simplest. Tube axial are similar to propellers but has a venturi around the propeller to reduce the vortices. Vane axial fans are equipped with vanes that trail behind the propeller in the airflow to straighten the swirling flow.
  • Inline Plastic Fans  By : Oleg Chetchel
    CB Blower Co. fans are the finest quality blowers available for efficient movement of corrosive, humid, or polluted air, gases, and fumes. These fire-retardant and corrosion-resistant plastic fans are specially designed and especially suited for hostile applications where coated metal blowers typically corrode. CB Blower fans are proven thoughout the world and clearly recognized for superior quality, reliability, and efficiency.
  • Industrial Centrifugal Blower  By : Oleg Thcethcel
    Centrifugal fan can come in three different types of fan blades. They can come with forward curved blades, backward curved blades and straight radial blades. The type you need will come down to what the conditions are within the area in which you intend to use the device.
  • Buy Resale Rights And Be Your Own Boss  By : rozer hop
    Reselling isn’t a pushover especially if it is a piece of fine art. This has been the experience of auction biggies like Sotheby’s and Christie’s.
  • Industrial Blowers For Building Ventilation  By : Oleg Thcethcel
    The size of the blower may be regulated by the size of the environment in which it is to be operated. For instance, some units are big enough to house both the fan and its power supply. Smaller, portable blowers are mainly used for cleanups and in spaces that require temporary circulation or air transfer.
  • Sealed Ventilators and Blowers  By : Oleg Tetchel
    Buffalo Fan Co. has a lot of experince with gas tight and zero leakage construction on fans and blowers, including: multistage lip shaft seals; Buna-N, Viton and Teflon seals; mechanical shaft seals; special fan housing gasketings; single and double carbon ring seals; hermetically sealed blowers; magnetofluidic and ferrofluidic seals; and packed stuffing boxes with barrier liquids and purgeable seals.
  • Industrial Blowers Fans  By : Susan Terlitski
    In the aial flow ventilator the air must blow in line with the axis of rotation and there must be blades with space between them. With few exceptions, the axial blower or fan must not have a lot of back pressure and will work a lot better if the blade is shrouded. One obvious exception is the turbine compressor used in jet engines, but this requires very tight fittings and very high speed so the air is being rammed in against the outgoing air much faster than it can move - it uses a lot of power and makes a lot of noise. Shrouding works better because the greatest loss in an unshrouded fan is the air coming off near the tips and immediately turning out and back circulating only through the fan and not through the room. The most common shrouded fan people see is muffin style fan in computers. An axial blower can have multiple sets of blades and the blades can even over lap so light is not visible through the fan. Fans are used most often for moving large quantities of air between spaces at atmospheric pressure.
  • Axial Fans vs. Centrifugal Blowers  By : Susan Terlitski
    Radial Blade Blowers – Flat blades oriented in a radial pattern. These rugged fans offer high pressure capability with average efficiency. They are often fitted with erosion-resistant liners to extend the rotor life. The housing design is compact to minimize the floor space requirement.
  • Pulp and Paper Industry Ventilators  By : Oleg Tetchel
    Boiler fans create efficient combustion by supplying a consistent and reliable ait flow. Induce Draft Fans (I.D. Fans) operate at elevated temperatures and draw the air stream through the combustion chamber, then push it through pollution control equipment. Forced Draft (F.D. Fans) or Combustion Air Fans push the air stream into the boiler combustion chamber. Multi-Fuel Burning Power Boilers are used to create steam for different power needs. Induced Draft Fans are typically AMCA arrangement 3,
  • Workplace Requirements for Building Ventilation  By : Oleg Thcethcel
    The American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE) has established a general guideline of 20 cubic feet of outside air per minute/per person for an office environment. This is a sufficient amount of air to dilute building contaminants and maintain a healthy environment. Indoor air quality complaints increase significantly in offices that are not supplied sufficient outside air.
  • Blowers and Fans by Canada Blower  By : Susan Terlitski
    Fans are classified into propeller, tube axial and vane axial styles, and each type has different characteristics and different areas of application. Propeller fans ususally consist of only a motor and propeller and therefore are the simplest among all. Tube axial and vane axial are similar to propellers but has a venturi around the propeller to reduce the vortices. Vane axial fans are equipped with vanes that trail behind the propeller in the airflow to straighten the swirling flow.
  • High Temperature Axial Fans  By : Oleg Thcethcel
    Fans with ambient air cooling systems handling hot airstreams must have sufficient airflow and be kept in operation until airstream temperatures cool below 120 F to prevent damage to the fan unit. The Tubeaxial fan ambient air cooling system is only effective while fan is operating.
  • Different Types of methods To Save Your Business Energy  By : Davidzhao
    Businesses these days are almost everywhere. Regardless of whether or not large or even small, business business owners

    would like to make money and be well-known. To be able to operate your business properly, you may need to think about some

    factors that could affect your services.
  • New Very Quiet Compact Vaneaxial Fan  By : Susan Terlitski
    For a long time the efficient ventilation of remote rooms in the large houses could be done only with two independent air supply sources (like a furnace). Ventilating ductwork in contemporary large houses becomes so long and elaborated that even a high pressure furnace fan couldn't generate enough static pressure to blow through the whole length of such a duct. The existing low pressure booster duct fans, even though compact enough to be installed in-line in the house ventilation ductwork, still do not provide enough booster pressure / airflow. The usual solution to this problem was installation of two independent furnaces with different air ducts, which is rather expensive option.
  • A new design of high temperature fans and blowers for operating up to 2,200 F is introduced by Canada Blower.  By : Oleg Thcethcel
    Fans with ambient air cooling systems handling hot airstreams must have sufficient airflow and be kept in operation until airstream temperatures cool below 120 F to prevent damage to the fan unit. The Tubeaxial fan ambient air cooling system is only effective while fan is operating.
  • Roof Fans for Two-Way Building Ventilating  By : Oleg Tetchel
    The Type CBRE recirculators are designed for use in commercial and industrial applications where there is sufiicient ceiling height to create a temperature differential between the floor and the ceiling. These applications include factories, warehouses and large commercial buildings.
  • Inline Duct Fans  By : Oleg Tetchel
    The fan efficiency is directly contingent upon selection of fan and the operating point relevant to the system resistance.
  • Fans for Paper Industries  By : Susan Terlitski
    Canada Blower Co. is a supplier of blowers and fan for Pulp and Paper Industries. The paper manufacturing industry utilizes fans for power boilers, recovery boilers, lime kilns, dissolving tanks, and dryers. These applications, which are integral to the production process, are often very corrosive. Reliability and durability of fans and blowers for such applications are vital for continuous operation. Canada Blower fans for demanding and corrosive applications offer real value.
  • Pre-Buying Guidance To Have An Air Conditioner  By : Charles Gaines
    Purchase of Air conditioner is kind of investment that pay you back for a longer time period. Basically, the right functioning of air conditioner that benefits you at time of summery weather is a return advantage of buying appropriate air conditioner.
  • B2B Telemarketing in Digital Age  By : Aedan Robbert
    A lead generation company plays an important role in filling up the sales funnel of any business. B2B telemarketing, which is an integral part of this system, plays a major role in converting leads into sales with the help of effective business strategies.
  • Building Ventilation and Cooling  By : Oleg Tetchel
    Commonly available practical methods of plants cooling are:

    * Exhaust fans or Power Roof Ventilators (PRVs).

    To do a satisfactory job of eliminating excessively hot air, it is usually essential to have powered wall and/or roof exhausters. These fans should also help to control air pressure within the building whether it be negative or positive pressure.

    * Supply Fans or PRVs.

    A large number of buildings use exhaust PRVs to exhaust fumes, smoke, dust or other contaminants.
  • Fiberglass Blowers  By : Oleg Thcethcel
    FRP Pressure Blowers are designed for highly corrosive application to handle acid vapors, and organic and inorganic chemical fumes that are highly corrosive to metal at temperatures up to 250 F. Applications include scrubber systems, odor control systems in wastewater treatment plants, laboratory exhaust systems, metal finishing and chemical-process industries. Fiber-reinforced-plastic pressure blowers are made from chemical grade polyester or vinyl ester resins and reinforced with glass or fib
  • Energy Recovery Fans  By : Susan Terlitski
    Many HVAC system designers have realized the benefits of using Energy Recovery Ventilators (ERVs) in commercial and institutional buildings. However, as with many newly adopted technologies, questions of how best to apply this product are being raised. One application issue in particular is whether to apply an ERV as a stand alone unit on its own curb, or as a bolt-on accessory to a rooftop air conditioning unit.
  • Commercial vs. Industrial Fan  By : Susan Terlitski
    There is a difference between industrial and commercial grade fans construction. Industrial equipment is specifically designed and built to stand up to the rigors of an industrial application. The differences are concrete and easy to spot...if you know what to look for. Canada Blower designs and builds equipment strictly for industrial applications and has been doing it that way for over 100 years. Industrial fans and blowers are constructed of heavier duty materials and with higher quality.
  • Roles In A Lifecycle For Webcast Technology  By : Hardik Sanghvi
    Webcast technology refers to the technical method, stuff, and tools that are used for the entire process from the making of streaming media content up to a user's vision of the content. There are four main roles, which are spread over its whole lifecycle and comes into the picture right from the time of content making. It is then used to organize the content for allocation and also aids it. Finally, webcast technology is used for consumption of the content by the customer. The above four main ro
  • Proper Building Ventilation  By : Oleg Tetchel
    The volume of air required to operate a ventilating and cooling system is a very fundamental requirement. Before air volume is estimated or calculated, careful consideration should be given to the following factors. Be sure that the decision you make will accomplish the most important objectives or will overcome the most important problems. This should be the overriding consideration in the selection of a system of ventilation. Availability of money to finance the system is a factor that must be considered early in the planning stage. The funds available will affect the objectives you set and will influence the system of ventilation selected to meet the objectives.
  • Industrial Blower  By : Oleg Tchetchel
    The Food & Beverage Industry is comprised of wide variety of businesses that require fans for the cooling, drying, ventilating, packaging, and other process applications. Buffalo Blower fans are used in the conveying, drying and forming of animal feeds that allow for large scale production of beef, pork, dairy products, and poultry and eggs. The process of getting raw bulk grain materials from the farm to market also requires the use of fans for collecting, drying and properly storing food.
  • Finding Used standoff oil equipment  By : David Beckham
    Finding oil accessories at affordable prices is capital to befitting your conduct on agenda and aural the account allocated.

[1] [2[3] [4] [5] [6] [7] [8] [9] [10]

Powered by Article Dashboard