Picket Step Stools - Tips on how to Stain

By: Shelley Atkinson

Staining your individual wood bar stools shouldn't be very difficult. There are nonetheless, some straightforward steps to follow when you find yourself doing this the first time. In an effort to put together you'll need to choose the materials and clear a well ventilated work area. You will have to buy the bar stools, stain, polyurethane, 2 brushes, 1 bag of steel wool, sandpaper, and rag towels.

Choosing the bar stool is essential so belief your style, discover something that matches nicely with the design of the bar space and go along with it. The height and breadth of the stool is very important. Be sure that the stool top is snug for the size bar. You want to to have the ability to relaxation your elbows on the bar when sitting comfortably. Be sure that the ft of the stool will fit entirely on one surface type. Would not have have of the legs on carpet and the other half on tile it could be very annoying. Some choices to think about embrace kind of wooden, arm rests, back support, and seat cushions.

To be able to choose a stain it's a good idea to go to the store and get samples and take a look at them to match the wood of the bar or cabinets. Convey the samples back to the realm the bar is at and examine it with the surrounding wood. When constructing the bar from scratch this is simple because you can match the stain that was used from the bar. One of the most vital issues to remember when choosing a stain is the kind of wood the bar stool is made of. A stain will look otherwise primarily based on the kind of wood. Softer woods like aspen will absorb more stain then more durable woods like oak. Ask the attendant for assist!

Polyurethane, metal wool, sand paper,and and brushes are straightforward to choose. Polyurethane is a transparent coat that may protect the wood from scratches and liquid stains. Get a advantageous grade sandpaper to prep the wood. Steel wool pads might be used to superb sand before and after staining. get sponge brushes, a effective bristle brush, and rags to apply the stain and polyurethane.

After you have gathered all of the materials and cleared a ventilated work area you're ready to begin.

1. Sand the bar stool to take away any burrs or uneven areas, normally found across the joints where the wooden connects.
2. Use a metal wool pad to brush any areas to fantastic for sandpaper. try to go the identical direction.
3. Test the stain in an inconspicuous space prior to staining the entire stool utilizing the next instructions.
4. Use a sponge brush to apply the stain. Guantee that while you dip your brush to wipe away any extra stain before making use of it to the wood. You will paint in the same route of the grain a really thin coat.
5. Time 2 minutes and let the stain set in. Be consistent for every chair in order that they all look the same.
6. Wipe away the surplus stain with a rag once more in the identical path of the grain.
7. If the wood will not be the specified darkness repeat steps three by way of 6
8. Let dry for two - three hours then frivolously brush with metal wool in the same direction as the grain.
9. Flippantly wipe with a damp rag.
10. Use the high-quality bristle brush to apply a thin coat of polyurethane in a single course with the grain.
11. Let dry as per directions on aspect of polyurethane can. Then repeat step 10

After you've let the polyurethane dry completely you are finished and can place the Newly stained picket bar stools on the bar and enjoy your favorite beverage in luxury.

Article Directory: http://www.articletrunk.com

| More

To learn more about high quality folding step stool, visit our website at kidsstepstool.net

Please Rate this Article


Not yet Rated

Click the XML Icon Above to Receive Work From Home Articles Articles Via RSS!

Powered by Article Dashboard