Painting the Exterior of Your Home - Do it Yourself, Or Hire a Professional?

By: Barrero Rotner


The very first step in a quality exterior painting job, or even in any painting task for which matter, is begin with a clean surface. Which means that a person will need to power wash. You probably will need to rent a power washer - something can do at any main equipment or even tool rental store. A person will need a ladder to powerwash, depending on the height of your own home a person will require either an extension or even step ladder. (or even both)...a person can rent a powerwasher for regarding $100 a day. A person can rent ladders for about $40 a week.

Once you have just about all of this equipment you should power wash each and every surface that you plan to paint, making sure to make use of proper method so as not really to depart wand marks because of to the extreme water pressure. It is good to make use of a diluted mixture of chlorine bleach and sodium tri-phosphate to destroy and stop mold spores as well as to wash away chalking. Often people request, what is chalking? This really is that chalk like material which sticks to you when you contact the filthy parts of your home, that's most often existing on houses that have not already been colored in some time. A photo of chalking on a hands is below. Chalking is always the color of the fresh paint job and it is the fresh paint properties wearing down from sunshine.

To repeat: One of the most important steps in painting is actually to clean the working surface; otherwise, paint can't adhere to the filthy surface area and will peel within a 12 months. A person can employ a professional artist or even power cleaning contractor to clean a home generally for below $200.

Always be safe on steps and roofs, it's very easy for someone to slide and fall. Whenever power washing there's no require to get up close to the surface, generally eight feet away, approximately, is fine. Finally, it is very important to allow the surface area to totally dry off, allow at least a day for the cleaned region to try, longer when there is rain or high moisture.

Once you have permitted the fresh paint surface area to dried out a person can start planning the work surface area to receive fresh paint. Firstly you need to caulk. It's important to only use siliconized latex caulk. It has to have latex in this and say "paintable" on tube. Purchase color caulk to suit your paint color should you plan on just doing one coat of fresh paint, however white coloured caulk ought to be fine if you are planning on two jackets of paint and it is usually less expensive per pipe than coloured caulk. Make certain to caulk just about all gaps in the wood and joints. Do not caulk wood to stucco.

The next step in preparing your own painting surface area is to scrape, getting rid of all of the free and faltering paint, down to the uncovered wooden if at all possible. You should then tape and lay down tarps in the area where you stand position to fresh paint very first, and then place a coat of primer on all of the surfaces a person plan to paint. Paint primer color should be chosen according to exactly what color you're painting (it is not usually suggested to use white for darker colors). Make sure to include every thing however landscape bushes and plants. Putting tarps on bushes as well as vegetation can actually kill all of them because of to the tarps' weight and the warmth trapped around the plants, under the tarps.

Article Directory: http://www.articletrunk.com

| More

To find out more, pay a visit to kansas city home painting company and kansas city exterior painters

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Automotive Articles Articles Via RSS!


Powered by Article Dashboard