Essential Plastering Tips for Beginners

By: Peter Stayley Jones


Most beginners have the tendency of focusing their efforts on how they can apply the skim plaster on a specific part of the partition or ceiling that they are currently working on. In reality, this part of the plastering job is considered by the professionals as an easy and inconsequential aspect of this home improvement and repair job. Just like with any other home improvement and repair tasks, plastering entails a lot of preparation and practice in order to achieve an acceptable standard of the finished work.
A lot of DIY enthusiasts fail to anticipate how fast skimming plaster hardens; making it difficult for them to work on the material. Make sure you are properly organized and prepared before starting any plastering job. Once you have applied the first coat of plaster on a particular portion of the wall or ceiling, you must properly work on achieving a smooth and flat finish. You will end up with a botched job if you decide to stop work after you have already applied the plaster in order to get hold of some needed materials and tools.
As soon as the skimming plaster hardens, the only way that you can work on it is through sanding. Such option will definitely make the task a lot harder. Thus, it is very crucial that you are properly organized and prepared before you start applying the skimming plaster on the walls and ceilings. This basically means that you should have all the appropriate tools within easy reach and enough amount of skimming plaster to complete a section of the wall or ceiling.
If it is your first time to do plastering then it is important for you to you practice on the correct way of skim plaster mixing. You can do this by experimenting on small amounts of the plaster until you are able to effectively do the mixing procedure. Experts stress the importance of developing the right feel in skimming plaster mixing.
Proper mixing is determined by the right texture and consistency of the skimming plaster. It must have a thick cream consistency. It is also crucial that lumps in the skimming plaster are eliminated before commencing with the laying-on. Pour the right volume of water into the mixing bucket before gradually adding the skim plaster.
The key to proper mixing is the gradual adding of small amounts of the skim plaster. You have to thoroughly mix the plaster using the appropriate mixing paddle. Repeat the procedure until you are able to achieve the correct proportion of the water and lime plaster. For an effective mixing, it is very critical that you use the right type of mixing paddle prescribed for the job.
Another important consideration during the preparatory phase of the plastering task is the determination of the right size of the mixing bucket. Professional plasterers recommend that you use a bucket with one-bag capacity to ensure that you are able to prepare the right quantity of skimming plaster enough to cover a section of your partition or ceiling. You dont want to face a situation where you have to interrupt the laying-on in order to mix a second batch of the skimming plaster.
In mixing the required amount of skim plaster, it is essential that you use water that is clean and cold. Fill one third of the bucket with water and mix the skim plaster following the procedure that is outlined in this article. The ideal volume of the final mixture is usually twice that of the volume of water used.

Article Directory: http://www.articletrunk.com

| More

If you are interested in courses in plastering and would like to discover more simply click the following link: plastering course

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Home and Garden Articles Articles Via RSS!


Powered by Article Dashboard