Chemtex manufactures RO Cleaners for cleaning purposes.

By: Chemtex


We have available with us high grade RO Membrane Cleaner that is used in varied membranes and saves the power as well. The RO Membrane Cleaner that we deal in brings us repeated orders from the customers along with their huge appreciation. Additionally,, we are the foremost RO Membrane Cleaner Manufacturers in the domain

The Low pH RO Membrane Cleaner offered by us is preferred to Maxtreat 9202, Permaclean, Maxtreat 9204 and Indion cleaners for its better performance. The Low pH RO Membrane Cleaner is ideal for cleaning carbonate scales, metal Oxides, metal hydroxide deposits, sulfate scales, etc.

Dosage
ALKRO RO Membrane cleaners are used in dilution with potable water that is free of residual chlorine or other oxidizing agents to make the cleaning solution. The RO membrane cleaning solution is prepared by addition of recommended dosage of product. After adjusting the pH of solution as desired, the cleaning solution is then circulated throughout the system without exceeding pressures, temperatures and flow rates recommended by the membrane manufacturer. The RO membrane cleaning efficacy can be further improved by heating the cleaning solution and alternately circulating the solution for 15 minutes and then soaking the membranes for 15 minutes. This process can be repeated as many times as necessary. Dosage depends on severity of fouling, your CSL representative will recommend optimal cleaning times.

Applications NF / RO / UF Membranes
Attributes Saves power
Removes foulants
Easy to handle
CIP method (clean in place) used
Maintains flow rate
Increases productivity

Specifications
Chemical Type Organic Chemical Compounds
Form Liquid
Specific Gravity 1.2 0.05
pH 2 - 3
Solubility Completely Soluble in Water
We have available with us high grade RO Membrane Cleaner that is used in varied membranes and saves the power as well. The RO Membrane Cleaner that we deal in brings us repeated orders from the customers along with their huge appreciation. Additionally,, we are the foremost RO Membrane Cleaner Manufacturers in the domain.

Ideal For NF / RO / UF membrane
Variety Low pH RO Membrane Cleaner
High pH RO Membrane Cleaner
High Silica RO Membrane Cleaner
RO Membrane Biocide Cleaner

The High Silica RO Membrane Cleaner that we bring forth is available in acidic form. The High Silica RO Membrane Cleaner is a powder chemical that is useful in recovering fouled RO membrane.

Dosage
ALKRO RO Membrane cleaners are used in dilution with potable water that is free of chlorine (residual) or other oxidizing agents to make the cleaning solution. The RO membrane cleaning solution is prepared by addition of recommended dosage of product. After adjusting the pH of solution as desired, the cleaning solution is then circulated throughout the system without exceeding pressures, temperatures and flow rates recommended by the membrane manufacturer. The RO membrane cleaning efficacy can be further improved by heating the cleaning solution and alternately circulating the solution for 15 minutes and then soaking the membranes for 15 minutes. This process can be repeated as many times as necessary. Dosage depends on severity of fouling, your Chemtex representative will recommend optimal cleaning times.

Preferred For Cip (clean in place) method
Foulants removal
Enhancing permeate water quality
Ease of handling
Cleaning High Silica and Iron
Flow rate maintenance
Power saving
Increased productivity
Gives Better Performance Than Maxtreat 9822
Permaclean
Maxtreat 9800
Indion cleaners
Applications RO / UF/ NF Membranes

Specifications
Chemical Type Organic Chemical Compounds
Form Powder
Specific Gravity N/A
pH Acidic
Solubility Completely Soluble in Water

We offer RO Membrane Biocide Cleaner that helps in getting rid of biofouling along with biofilms formation in the membrane. The RO Membrane Biocide Cleaner is chlorine free and therefore requires no chlorination, etc. Besides, it gives better performance as compare to Maxtreat 9651.

Praised For
Saving power
Increasing productivity rate
Enhanced permeate water quality
Biodegradability
Flow rate maintenance
Eliminating requirement of feed water chlorination and de‐chlorination

Dosage
ALKRO RO Membrane Biocide or RO Membrane Disinfectant is normally fed continuously prior to the final cartridge filter. RO Membrane Biocide / RO Membrane Disinfectant should be injected by chemical dosing pump from a dilution tank or directly from the drum to the feed water line. The amount of RO Membrane Biocide / RO Membrane Disinfectant required to inhibit biofouling depends on the quality of feed water.

RO Disinfectant can also be dosed in high dosage to immediately remove the biofouling from the RO membrane. The specific dosage rates will be specified by the Chemtex technical representative.

Specifications
Chemical Type Organic Chemical Compounds
Form Liquid
Specific Gravity 1.15 0.05
Chlorine NIL
Key Property Totally Biodegradable
pH 3-5
Solubility Completely Soluble in Water

Article Directory: http://www.articletrunk.com

| More

Chemtex speciality limited is a such a brand which is helpful in many industrial plants. I am a chemical engineer have been very satisfied with their products.Their products are very much productive and at a same time they are cost effective as well. Contact Us Chemtex Speciality Limited Regd. Office :33 Brabourne Road, Kolkata 700 001, West Bengal, India Phone : +(91)-(33)-7111-1111 / 7111-1112 Fax : +(91)-(33)-7111-1117 Mobile : +(91)-896-111-1111 Website:-www.chemtexlimited.com

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Cleaning Articles Articles Via RSS!


Powered by Article Dashboard