The Design CBC Pressure Blower is available in four arrangements and eight discharge positions to suit most every application. In addition to direct drive, the Design Pressure Blower is also available in belt drive. CB Blower Co. industrial pressure blowers and high pressure radial fans are supplied in cast aluminum, cast iron, or all-welded construction to prevent flexing at high pressure. Available in direct drive arrangements 4 / 4V / 4H / 7 / 8 and belt drive arrangements 1 / 9S / 9T / 9H. Capacities: to 10,000 CFM. Single stage pressure blowers develop up to 4 psi static pressure. Two stage pressure blowers and multistage pressure blowers are for higher pressure. An extremely wide performance range is provided by 70 wheel / housing combinations.
CB Blower Co. single stage pressure blower is designed for combustion, air, fluid bed aeration, cooling, drying and many process system applications. It is also commonly used in pneumatic conveying systems.
Operating Range of Pressure Blowers can be summarized as:
Maximum CFM: 18,000
Maximum Static Pressure: 91" wg
Maximum Temperature: 200°
Fan Sizes:1 4" to 38"
DESIGN CAST ALUMINUM PRESSURE BLOWERS
Buffalo Blower cast aluminum pressure blowers utilize high-strength alloys to create strong, corrosion-free housings and wheels ideal for adverse industrial environments. Aluminum also stands up to sub-zero ambients without material deterioration. Since aluminum is non-magnetic and non-toxic, CB Blower Co.'s pressure blowers are recommended for both electronic and food related applications. The non-sparking properties qualify Chicago's pressure blowers for AMCA Type B spark resistant rating.
Operating Range of Aluminum Pressure Blowers is:
Maximum CFM: 3,000
Maximum Static Pressure: 25" wg
Maximum Temperature: 200°
Fan Sizes: 8" to 18-1/2"
RBO HIGH PRESSURE RADIAL FANS
To meet specific applications, CB Blower Co. RBO radial fans can be built with stainless steel or alloy construction. Split housings facilitate wheel removal without disturbing connecting ductwork. Integral inlet boxes, pre-spin inlet dampers and opposed-blade outlet dampers all control air flow. Belt guards and shaft coolers are also common options, in addition to the various housing and wheel liners. Buffalo Blower engineers are eager to design and build the pressure fan that meets your exact requirements.
Application for CB Blower Co. RBO High Pressure Radial Fans are:
CB Blower Co. High Pressure Air Fans are at work in as many diverse applications as they are in locations throughout the world. Clean air applications include combustion air, air drying primary air ejectors, and product cooling. This fan can handle pneumatic conveying systems. The RBO fan is ideal for corrosive exhaust, air pollution systems and chemical processing. By adding ceramic tile or chromium carbide wheel and housing liners, CB Blower Co.'s ORB fans easily handle abrasive materials. In particular, fans with ceramic tile liners are extremely effective in pulverized coal applications, handling up to 250 grains per cubic feet of air. For corrosive gases, a stainless steel wheel and housing is available, or a lower cost rubber-lined, mild steel housing will often fulfill the requirements.
Operating Range for ORB Radial Blowers:
Maximum CFM: 440,000
Maximum Static Pressure: 108" wg
Maximum Temperature: 1000°
Fan Sizes: 20" to 100"
For additional information please refer to http://cbblower.com/fanblower.html
Industrial Process Equipment Designer
CB Blower Co.
Article Directory: http://www.articletrunk.com
Oleg Chechel - Senior Industrial Process Equipment Designer
CB Blower Co. - Fans and Blowers Industrial OEM Sales
Please Rate this Article
Not yet Rated