Beginners Guide to Steam Cleaning Carpets

By: Jerry Marshal


Carpet adds to the beauty of your home like no other. Overtime, dirt and grime get accumulated deep into the carpet fibers. Cleaning a dirty carpet is no easy task to accomplish. The kind of cleaning method you apply for your floors, will never work for the carpet. What you need is a gentle cleaning technique that allows you to purge the dirt embedded into the carpet, without damaging its fiber. Steam cleaning is one such technique that can do the trick for you. Compiled in this article are step-by-step guidelines on how to steam clean carpet.

Step 1 - Rent a steam cleaning machine from a local hardware shop. Start by vacuuming the surface thoroughly to remove any loose dirt. Remove furniture out of the way before starting the cleaning process.

Step 2 - If the carpet is heavily stained or soiled apply pre-treatment spray directly on the spot and allow it to saturate deeply for 5 to 10 minutes before wiping it clean with a wet rag.

Step 3 - Remove the water container from the steam cleaning machine and fill it with warm water, mix 2 cap of cleaning solution to the heated water. Opt for a cleaning solution that is been specifically designed to be used on steam cleaning machine. You can easily find a suitable cleaning solution in your local hardware shop. Place the water container back in the steam cleaner.

Step 4 Plug in the steaming machine, switch on the power button and wait for couple of minutes until the built-in heater has fully heated the water. Once, the machine starts wafting the steam, start working it along the floor. Start from one corner of the room and work your way to the center of the room, this will prevent you from stepping on the area already cleaned.

Step 5 Continue the steaming process until you have cleaned the entire floor. Later, run a vacuum on the entire carpet to extract any residue of water or soap.

Step 6 Spill out the dirty water from the water tank. Follow the instruction given on the owner's manual precisely to clean the steaming machine.

Step 7 - Let the carpet dry of completely before attempting to manoeuvre the furniture back in the room. When dry, check the surface to see if there are any trails of soap or dirt. As an extra measure, you can sprinkle some baking soda over the carpet and allow it to remain overnight. In the morning, vacuum the surface to remove the dust of baking soda. This will act as a natural deodorizer ridding the carpet of any pungent odour.

Handy tips

Make sure to steam clean your carpet at least twice a year, to keep it sparkling new all year round.

Never overlook pre-treating stubborn stains before starting with the actual steam cleaning process.

Make it a point to empty and clean the water tank as soon as possible after steam cleaning. If the dirty water is left to remain for prolonged period of time it will start smelling bad.

Each model of steam cleaning machine is designed differently. Follow the instruction given in the manual to the word, for the exact measure of water and cleaning solution to be used.

Article Directory: http://www.articletrunk.com

| More

For heavily soiled carpet, regular cleaning will just not do, what you need to do is steam clean the carpet to purge the dirt embedded deep within. For best carpet cleaning in Westchester, visit this site.

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Cleaning Articles Articles Via RSS!


Powered by Article Dashboard