Automatic Watering Systems for your Lawn

By: Ryan Patingson


Automatic watering systems come in handy for the purpose of watering your lawn. This is largely attributed to the fact that you don't have to turn the system on and off. It is one of the most effective ways of conserving water as well since it helps you control how much is used. More importantly, it cuts down your costs since the lawn is watered consistently and it is not stressed as a result of lack of water. Though all this sounds appealing, there are a couple of things you need to know about automatic watering systems and these are as highlighted below.

Take into Consideration the Installation

Several decisions need to be made before installing these watering systems. While this is the case, one of the most important decisions you have to make is whether to hire a professional contractor or carry out the installation on your own. There are several websites that offer helpful information about this and you can go through these before making your decision. If you decide to hire a contractor, make sure they are reputable and known to adhere to quality installation standards.

This is the best way to ensure that you get value for your money. You have to research on the products that need to be used. Just like when shopping for other equipment, you have to ensure the automatic sprinkler systems you buy are of the highest quality. Be carefully not to buy low quality sprinkler systems that don't match up to your requirements or expectations.

Valves

Valves of these systems are solenoid and this means they work electrically in order to open the flow of water to the areas they are wired. There is 1 valve per zone and this is operated with the help of a control box. These valves operate differently and they should be programmed in order to reap maximum benefits from them. It is for this reason that you need to be well informed about the valves before installing the system.

Controls

The watering systems have control valves and these consist of programmable timers which send signals to valves for the sprinkler to come in. These controls are used to determine the days when the sprinklers some on and the duration they should stay on. Valves are linked to these controls by some wires which are specially designed for lawn watering systems. The type of control you end up with is often dependant on the zones available.

Zones

This refers to a collection of misters or sprinklers. There is a certain pressure that needs to be maintained and water demands that need to be met and as such, you will find a couple of valves on each zone. In most cases, a zone has one valve and incase two zones are run at concurrent times, the water pressure is reduced and this beats the purpose served by the zones. It is therefore important to ensure that this setting is done appropriately.

Before you get into the market to shop, it is advisable to look at all your options and come up with a budget in order to make an informed purchase.

Article Directory: http://www.articletrunk.com

| More

Automatic watering systems ensure that your lawn is properly watered and at the same time avoids any excess use of water thus saves it. Visit this website to get more information on various irrigation systems.

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Gardening Articles Articles Via RSS!


Powered by Article Dashboard